PFXGP4116T2D : HMI 4.3 " 480 x 272pixels, RS-422/485 + USB 2.0, 24VCD - Pro-face

Pro-face GP4000

PFXGP4116T2D : HMI 4.3 " 480 x 272pixels, RS-422/485 + USB 2.0, 24VCD - Pro-face

Name: PFXGP4116T2D : HMI 4.3 " 480 x 272pixels, RS-422/485 + USB 2.0, 24VCD - Pro-face
Brand: Pro-face
SKU: PFXGP4116T2D
Price: 23500.00 THB
Availability: InStock

Part no.: PFXGP4116T2D

฿23,500

In stock

Product details

Standard product information

Family	HMI
Series	GP4100 Series
Size	4.3"
Model	PFXGP4116T2D
Global Code	PFXGP4116T2D
Product Features	4.3" Wide DC RS-422/485 Color
Repair Status	- (Maintenance service is not available. Replace with a new unit.)

Display specifications

Display type	TFT Color LCD
Display size	4.3" Wide
Resolution	480 x 272 pixels
Effective display area	W95 x H53.9 mm [W3.74 x H2.12 in.]
Display colors	65,536 colors
Backlight	White LED (Not user replaceable. When replacement is required, contact your local distributor.)
Backlight service life	50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)
Brightness control	16 Levels (Adjusted with touch panel)

Electrical specifications

Rated input voltage	12 to 24 Vdc
Input voltage limits	10.2 to 28.8 Vdc
Allowable voltage drop	1 ms or less with lowest input voltage, 10 ms or less with rated input voltage
Power consumption	Max. 7.7 W When power is not supplied to external devices: 3.6 W or less
In-rush current	12 Vdc: 20 A or less, 24 Vdc: 40 A or less
Voltage endurance	1,000 Vac, 20 mA for 1 minute (between power terminal and FG terminals)
Insulation resistance	500 Vdc, 10 MΩ or more (between power terminal and FG terminals)

Environmental specifications

Surrounding air temperature	0 to 50 °C [32 to 122 °F]
Storage temperature	-20 to +60 °C [-4 to 140 °F]
Ambient humidity	10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)
Storage humidity	10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)
Dust	0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution degree	For use in Pollution Degree 2 environment
Corrosive gases	Free of corrosive gases
Air pressure (altitude range)	800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)
Vibration resistance	IEC/EN 61131-2 compliant 5 to 9 Hz single amplitude 3.5 mm [0.14 in.] 9 to 150 Hz fixed acceleration: 9.8 m/s2 X, Y, Z directions for 10 cycles (approx. 100 min.)
Concussion resistance	IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times
Electrostatic discharge immunity	Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)

Memory

Application memory

When using GP-Pro EX:
- Media: FLASH EPROM
- Screen Area: 8MB *Use the screen area when the user font area's capacity is exceeded - for example, when an image font or a picture font is used.
- User Font Area: None
- Logic Program Area: 132KB (Equivalent to 15,000 steps) *Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
- Free Space: None
Removable System: No

Backup memory

When using GP-Pro EX:
- Screen Area: FLASH EPROM 128KB
- Variable Area: None
Battery: None*1

For details on the memory size, refer to the manual for your screen editing software.

Interface specifications

Serial (COM1)	Asynchronous Transmission: RS-422 / 485, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 (1,200) to 115,200 bps, 187,500 bps (MPI), Connector: 2-piece terminal block 9 pin
USB (Type A)	Conforms to USB 2.0 (Type A) x 1 Power supply voltage: 5 Vdc ±5 % Communication distance: 3 m [9.84 ft.] or less
USB (mini-B)	Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 3 m [9.84 ft] or less

Structural specifications

Grounding	Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, or your country’s applicable standard (same for FG and SG terminals).
Cooling method	Natural air circulation
Structure	IP65F, Type 1, Type 4X (indoor use only), Type 13*2
External dimensions	W124.9 x H90.4 x D38.8 mm [W4.92 x H3.56 x D1.53 in.]
Panel cut-out dimensions	W112.5 x H77.5 mm [W 4.43 x H3.05 in.] with Panel Cutout Adapter (PFXZCFAD31, sold separately): W105 x H66 mm [W4.13 x H2.6 in.]
Weight	0.22 kg [0.49 lb] or less

The front face of the unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the unit's level of resistance is equivalent to these standards, oils that should have no effect on the unit can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the unit's front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the unit and separate protection measures are suggested. Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the unit, be sure to confirm the type of conditions that will be present in the unit's operating environment. If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, be sure to replace the installation gasket regularly.

Dimensions

External dimensions